Voron 0.1
Bondtech CHT Hardened BiMetal nozzles (V6/Dragon)
Bondtech CHT BiMetal RepRap Coated NozzleCopper and Hardened Vanadium Steel nozzles for high flow ap..
£41.50 Ex Tax: £34.58
Bondtech CHT nozzles (V6/Dragon)
As a Bondtech reseller, I can now bring you their CHT nozzles. Price is per nozzle, picture is ..
£17.80 Ex Tax: £14.83
Bondtech CHT VOLCANO nozzles (V6 Volcano/Rapido UHF)
As a Bondtech reseller, I can now bring you their CHT nozzles. Price is per nozzle, picture is ..
£22.08 Ex Tax: £18.40
Bondtech Heatlink 24V 50W Heater
Plug & Play Heater1.5m leads with black sleeves and Molex micro-fit 3.0 female connector;Ø 6mm S..
£12.50 Ex Tax: £10.42
Bontech LGX Lite v0.1 Olof X Bracket - SLS Nylon
Olof X carriage mount in SLS Nylon. This is stronger and more heat tolerant than an ABS mount, and y..
£12.00 Ex Tax: £10.00
CatBed 125mm PEI Flexplate with Magnet
CatBed is a PEI flexplate. Comes with magnet sticker.These use a high quality Japanese PEI, and 0.5m..
£20.00 Ex Tax: £16.67
Daylight on a Matchstick
Voron Daylight on a Matchstick by Blamm.The smaller version for 0.1.Now with two options, cheap 80 C..
£4.80 Ex Tax: £4.00
E3D Revo Micro 24V
E3D Revo™ Micro 24VReady for Revo. Change nozzles at room temperature using just your fingers. ..
£83.88 Ex Tax: £69.90
E3D Revo Micro 24V Fully Loaded
E3D Revo™ Micro 24V Fully Loaded - with 0.25mm, 0.4mm, 0.6mm, and 0.8mm nozzles.Ready for Revo. ..
£130.00 Ex Tax: £108.33
Gates PowerGrip GT LL-2GT188RF Belt loop (6mm width, per loop)
Belt with fibreglass core. These loops are used for ERCF and 2.4 Z gearing.They are RF Belts not EDP..
£3.00 Ex Tax: £2.50
Gates PowerGrip GT LL-2GTE EPDM High Temp Belt (6mm width, per meter)
EPDM belt with fibreglass core. These are an equivalent to the normal belts used on Vorons, but they..
£7.20 Ex Tax: £6.00
Gates PowerGrip GT LL-2GTE EPDM High Temp Belt (9mm width, per meter)
EPDM belt with fibreglass core. These are an equivalent to the normal belts used on Vorons, but they..
£10.00 Ex Tax: £8.33
GDStime 3007 5V fan
Dimensions:30X30X7mm Voltage: DC5V 0.15A Bearing: ball bearing Connector: XH2.54-2P Leadwire:15c..
£5.00 Ex Tax: £4.17
GDStime 3010 24V Axial fan
Dimensions:30X30X10mmVoltage: DC24V 0.06ABearing: ball bearingConnector: XH2.54-2PLeadwire:15cmFan s..
£6.00 Ex Tax: £5.00
Graviflex Magnetic Foil 125mm x 125mm
GraviFlex® Magnetic Foil 200 is a high strength magnetic foil, with an adhesive force of 130g/m².It ..
£10.00 Ex Tax: £8.33
KGLM-03 bearings
IGUS KGLM-03 bearings. Used in mods for tiny printers.Price is per bearing, rated to 80C...
£3.59 Ex Tax: £2.99
LDO Kirigami Bed
LDO's kirigami bed.This Aluminium version is at a keen price and comes with all the hardware you nee..
£20.95 Ex Tax: £17.46
LDO Picobilical
The Picobilical by LDO is a mod designed specifically for the Voron 0 printers. The Picobilical is b..
£41.95 Ex Tax: £34.96
LDO Voron V0.1 Nut Bar
If you've self built a v0.1 or used a Formbot kit, you might not like the printed nut adaptors.These..
£6.95 Ex Tax: £5.79
LDO Voron V0.2-S1 Kit
Voron V0-S2 Full Kit - With the option of RPi Zero 2W or RPi 4B at RRP!IN STOCK FOR IMMEDIATE DISPAT..
£629.00 Ex Tax: £524.17
Meanwell LRS-200-24 Power Supply
Standard BOM spec 24V PSU for VoronsDC Voltage 24VRated Current 8.8ARated Power 211.2WRipple and Noi..
£29.99 Ex Tax: £24.99
Meanwell LRS-200-48 Power Supply
Standard 48V PSU for VoronsDC Voltage 48VRated Current 4.4ARated Power 211.2WRipple and Noise (Max) ..
£27.00 Ex Tax: £22.50
Meanwell UHP-200-24 Power Supply
Smaller than the standard LRS power supplies and significantly more efficient. These PSUs have activ..
£60.00 Ex Tax: £50.00
Meanwell UHP-200-48 Power Supply
Smaller than the standard LRS power supplies and significantly more efficient. These PSUs have activ..
£56.00 Ex Tax: £46.67