Accessories
1x Molex Microfit 3.0 1x3 male+female connector and crimps
Contains 1x Molex Microfit 3.0 1x3 male connector, 1x Molex Microfit 1x3 female connector, and 4 of ..
£2.10 Ex Tax: £1.75
1x Molex Microfit 3.0 1x6 male+female connector and crimps
Contains 1x Molex Microfit 3.0 1x6 male connector, 1x Molex Microfit 1x6 female connector, and 7 of ..
£4.74 Ex Tax: £3.95
2x Molex Microfit 3.0 1x2 female connector and crimps
Contains 2x Molex Microfit 3.0 1x2 female connectors, and 5 crimps.Note that molex connectors are ap..
£2.10 Ex Tax: £1.75
2x Molex Microfit 3.0 2x1 female connector and crimps
Contains 2x Molex Microfit 3.0 2x1 female connectors, and 5 crimps.Note that molex connectors are ap..
£2.34 Ex Tax: £1.95
2x Molex Microfit 3.0 2x2 male+female connector and crimps
Contains 2x Molex Microfit 3.0 2x2 male connector, 2x Molex Microfit 2x2 female connector, and 10 of..
£4.74 Ex Tax: £3.95
6 Pin CANbus connectors
CNlinko connectors for CANbus.6 pin connectors designed to allow for CAN+, CAN-, +ve, Gnd, and two s..
£10.00 Ex Tax: £8.33
BMG® Internals Set for HextrudORT / Voron
Genuine Bondtech BMG internals for Clockwork 1/Clockwork 2, or HextrudORTIf using Clockwork 1, with ..
£35.94 Ex Tax: £29.95
BMG® Internals Set for Sherpa Mini
Genuine Bondtech BMG internals for Sherpa MiniOriginal Bondtech® OEM set of parts to use on the Sher..
£35.94 Ex Tax: £29.95
Bondtech CHT Hardened BiMetal nozzles (V6/Dragon)
Bondtech CHT BiMetal RepRap Coated NozzleCopper and Hardened Vanadium Steel nozzles for high flow ap..
£41.50 Ex Tax: £34.58
Bondtech CHT nozzles (V6/Dragon)
As a Bondtech reseller, I can now bring you their CHT nozzles. Price is per nozzle, picture is ..
£17.80 Ex Tax: £14.83
Bondtech CHT VOLCANO nozzles (V6 Volcano/Rapido UHF)
As a Bondtech reseller, I can now bring you their CHT nozzles. Price is per nozzle, picture is ..
£22.08 Ex Tax: £18.40
Bondtech Heatlink 24V 50W Heater
Plug & Play Heater1.5m leads with black sleeves and Molex micro-fit 3.0 female connector;Ø 6mm S..
£12.50 Ex Tax: £10.42
Bondtech LGX Secondary Gear
Replacemet Secondary Gear for Bondtech LGX/LGX Lite..
£4.00 Ex Tax: £3.33
Bondtech Shaft Assembly
Replacement Shaft assembly for our Bondtech Mini Geared (BMG), SingleDirect and DualDirect extruders..
£3.50 Ex Tax: £2.92
Daylight on a Matchstick
Voron Daylight on a Matchstick by Blamm.The smaller version for 0.1.Now with two options, cheap 80 C..
£4.80 Ex Tax: £4.00
Daylight on a stick
Voron Daylight on a Stick by BlammNow with two options, cheap 80 CRI 400k LEDs, or high end genuine ..
£6.00 Ex Tax: £5.00
Daylight on a stick XXL
Voron Daylight on a Stick by Blamm, modded by Lab4450. These are designed for 350mm printers, a..
£9.60 Ex Tax: £8.00
Deez Nozzle (Cat Buttholes!!!) - NON HIGHFLOW V1
A cast then fully machined, fully Tungsten Carbide Nozzle..4mm, .5mm orifice, spacers also available..
£40.00 Ex Tax: £33.33
Disco on a stick
Voron Disco on a Stick by Blamm.The larger version for 2.4/Trident, in RGBPrice is per stick, Comes ..
£8.64 Ex Tax: £7.20
E3D Revo Micro 24V
E3D Revo™ Micro 24VReady for Revo. Change nozzles at room temperature using just your fingers. ..
£83.88 Ex Tax: £69.90
E3D Revo Micro 24V Fully Loaded
E3D Revo™ Micro 24V Fully Loaded - with 0.25mm, 0.4mm, 0.6mm, and 0.8mm nozzles.Ready for Revo. ..
£130.00 Ex Tax: £108.33