.png "PrintyPlease.uk"){kind=logo}
Hartk's ERCF toolhead PCB
The ERCF version of Hartk's toolhead pcb, with an extra microfit connector for 5V/FS.
This supports the filament sensor for ERCF, or can be used to power Stealthburner LEDs etc (the normal board has no 5V). Using the solder bridges, you can use 5V fans instead of 24V if you're a weirdo. If you split the 5V line, and use the XES signal port, you can use both ERCF filament sensor AND Stealthburner LEDs.
Comes with all the crimps and connectors you need.
Github here: https://github.com/VoronDesign/Voron-Hardware/tree/master/Afterburner_Toolhead_PCB
ERCF Toolhead PCB
- Product Code: ERCFToolheadPCB
- Availability: In Stock
-
£15.54
- Ex Tax: £12.95
- Price in reward points: 1554
Related Products
Clockwork 2 / Stealthburner 2 piece Hartk PCB
Note: Rev1/Rev2/Rev3 have a strange wire order for the steppers, as detailed on the left below. This..
£14.94 Ex Tax: £12.45
Clockwork 2 / Stealthburner 1 piece Hartk PCB
This PCB mounts under a flap on Clockwork2, and allows you to connect all your wiring for easy compo..
£13.90 Ex Tax: £11.58
Clockwork 2 / Stealthburner 2 piece Hartk LED PCB
This is a silly product and you shouldn't buy it.Take a 2 piece PCB, and replace the 2nd part with t..
£8.40 Ex Tax: £7.00
LGX Lite / Stealthburner 2 piece Hartk PCB
This is the LGX Lite version of the Hartk 2 piece CW2 PCB. It uses the regular Hartk main part and a..
£14.94 Ex Tax: £12.45
LGX Lite / Stealthburner 2 piece Hartk PCB - SECOND PART (SB SIDE) ONLY
SECOND PART (SB SIDE) ONLY - IF YOU ALREADY HAVE THE BASE PCBThis is the LGX Lite version of the Har..
£7.20 Ex Tax: £6.00
LDO Toolhead Breakout and Wiring Harness
LDO Breakout PCB for in your electronics bay, with 2.1m cable to link to the toolhead PCB (toolhead ..
£26.95 Ex Tax: £22.46
