Whoppingpochard's Maxwell Kinematic mounts for Voron 2.4.

The rear brace depends on your bed holes being the stock distance apart, 150mm, meaning a 140mm gap between the extrusions. I've had reports that Fystec kits use a not-as-spec 205mm hole spacing, which is not correct for either 2.4r1 or 2.4r2. Please check your bed holes (or be prepared to drill more) before ordering!!

These will require a central hole in the back of your bed, you may have this if you have a "universal" trident compatible bed, if not, you will need to drill one.

Documentation here, Please read before purchase:

https://github.com/tanaes/whopping_Voron_mods/tree/main/kinematic_bed

https://github.com/tanaes/whopping_Voron_mods/tree/main/kinematic_bed#assembly